Anti-Static Cleanroom Tape | Conductive Adhesive | Pack - X018

$282.42 - $391.42
No reviews yet Write a Review
Calculated at Checkout

Anti-Static Cleanroom Tape | Conductive Adhesive | 2.4 Mils Thick | 108′ Long | Pack*

UltraTape X018 provides the following benefits:

  • Antistatic tape, does not build up charge during unwind, application or removal
  • High temperature resistance
  • Cleanroom Certified (UltraClean and Classic Clean packaging available)

*Manufactured to Order in Pack Quantities ONLY, estimated Lead Time of 25 Days

Ultratape X018 is a cleanroom polyimide film tape that has been coated with a anti-static silicone adhesive. The adhesive as been loaded with conductive particles in order to achieve the maximum static dissipation. This is an excellent choice for any workspace where electrostatic discharge control (ESDC) is critical for successful outcomes.

Backing Polyimide
Adhesive Filled Silicone (Polysiloxane)
Surface Resistivity 103 - 106 ohms
Backing Thickness 1.0 mil (0.025 mm)
Adhesive Thickness 1.4 mil (0.035 mm)
Adhesion to Steel 180 degree Peel 9 oz/inch (1N/cm)
Operating Temp -40°F to 500°F (-40°C to 260°C)
Elongation at Break NA
Tensile Strength 28 lbs./in (50 N/cm)
Length 36 yard
Available Colors Bronze (BZ)

Clean Packaging options for UltraTape
UltraClean: UltraClean offers products that are inspected and individually wrapped in cleanroom polyethylene bags and offers the highest level of cleanliness available for today’s critical environments. UltraClean meets requirements for Class 1 to 1,000 (ISO Class 3-6) cleanrooms.
Classic Clean: Classic Clean offers cleanroom packaging and is ideal for keeping products safe from environmental contamination prior to use. Classic Clean meets requirements for Class 10,000 to 100,000 (ISO Class 7-8) cleanrooms.

Storage: Material should be stored at 70 degrees Fahrenheit and 50% relative humidity

Installation: To achieve best result, surface must be clean, dry, and free of foreign material, dust, and oil. Apply firm, sustained pressure to obtain optimal adhesion.

Values provided should not be used for specification purposes. Each user should perform their own tests in the actual intended application and environment to determine suitability and assumes all risks and liabilities connected with using this product.

108 ft,
3 mils,