UltraTape 2265/0265 Anti-Static Cleanroom Tape | Printed ESD Symbol | 108′ Long | Pack*
2 Inch width is normally in stock. This tape offers the following benefits:
- Anti-static (ESD safe)
- Bright opaque colors (black printed text)
- Solvent resistant
- Outstanding durability
- Cleanroom certified (UltraClean and Classic Clean packaging available)
*This is a made to order item available in Pack Quantities Only with a 25 Day Lead time
UltraTape 2265 is a cleanroom anti-static tape available in multiple colors for floor, tool and safety marking as well as a wide range of applications were opaque colors are needed. This tape has printed ESD symbols printed and overlaminated for extra durability and solvent resistance. ESD Tape is allowed in the ESD sensitive areas for 5S and production marking.
Please note: Red/White and Black/Yellow tape is identical to all other 2265 tapes but DOES NOT have the printed ESD symbol.
| Backing | Vinyl base / PET over lamination |
| Adhesive | Rubber |
| Backing Thickness | 5 mils (0.127mm) |
| Adhesive Thickness | 1 mil (0.25mm) |
| Adhesion to Steel 180 degree Peel | 17 oz./in. (0.482 kg/25mm) |
| Operating Temp | 32°F to 176°F (0°C to 80°C) |
| Surface Resistance | 106-109 |
| Peeling Static Voltage | Min 100 V |
| Electrostatic discharge | Max 0.1 sec |
| Available Colors | BL, BK, BY, GR, RE, RW, WH, YE |
Color Codes: BL-Blue, BK-Black, BY-Black/Yellow, BW-Black/White, GR-Green, RE-Red, RW-Red/White, WH-White, YE-Yellow, OR-Orange
Clean Packaging options for UltraTape
UltraClean: UltraClean offers products that are inspected and individually wrapped in cleanroom polyethylene bags and offers the highest level of cleanliness available for today’s critical environments. UltraClean meets requirements for Class 1 to 1,000 (ISO Class 3-6) cleanrooms.
UltraClean comes packaged in multi-roll packs depending on size .5"(12), .75"(16), 1"(12), 1.5"(8), 2"(1 or 6), 3"(4), 4”(3)
Classic Clean: Classic Clean offers cleanroom packaging and is ideal for keeping products safe from environmental contamination prior to use. Classic Clean meets requirements for Class 10,000 to 100,000 (ISO Class 7-8) cleanrooms.
Storage: Material should be stored at 70 degrees Farenheit and 50% relative humidity
Installation: To achieve best result, surface must be clean, dry, and free of foreign material, dust, and oil. Apply firm, sustained pressure to obtain optimal adhesion.
Values provided should not be used for specification purposes. Each user should perform their own tests in the actual intended application and environment to determine suitability and assumes all risks and liabilities connected with using this product.
- 108 ft,
- Thickness
- 6 mils,
