Test Kit Upgrade, Portable, For Ionizers
- Stainless Steel Conductive Plate for Static Field Meter
Used to measure offset voltage and discharge times for the periodic verification of ionizers per ANSI/ESD SP3.3 and ESD TR53.
- ±1000 Volt Charger
Apply charge to conductive plate to measure discharge times of air ionizers.
- Made in the United States of America
This item is made and stocked in Chino, CA.
The Ionization Test Kit isolates the conductive Plate and positions it 1" away from the end of the Digital Static Field Meter. The battery operated Charger then allows one to quickly place a +/-1,000 volt charge on the Plate which since it is isolated will remain there for some time. The Periodic Verification of Air Ionizers test in accordance with ESD-SP3.3 is to place the Kit in the Ionizer's airflow and use a stopwatch to measure the discharge times to reduce a 1,000 volt charge to 100 volts and to reduce a -1,000 volt charge to -100 volts. With the Kit grounded, it can then approximate offset voltage (balance).
"Air ionizers Compliance Verification ESD SP3.3, Periodic Verification of Air Ionizers. Objective, The objective of this periodic test procedure is to verify that the discharge time and offset voltage (ion balance) of air ionizers is in compliance with the user's specification. Measurements should be made at the location where ESD sensitive items are to be ionized." (ESD TR53 Compliance Verification of ESD Protective Equipment and Materials)