Dual Wrist Strap, Adjustable, Woven, 4mm Snaps, 12' Cord
- Patented (US patents 6,052,053 and 6,205,408) Dual Wire Wrist Strap provides redundancy
Even if one dual wire wrist strap conductor is severed, operator has reliable path-to-ground with other wire - Use with resistive loop technology continuous monitor
Continuously verifies the proper resistance to ground of the operator - 4mm snaps are machined to precision profile from 300 series stainless steel
Forms a consistent and reliable connection - 304 stainless steel back plate
- Woven Silveron™ fabric infused with silver monofilament conductive fiber
Comfortable and hypo-allergenic - Superior resistor connection strain relief
Superior reliability. Greatly exceeds ESD S1.1 Bending Life Test. Tested at over 200,000 cycles vs. the 16,000 requirement - Single (Snap-One™) snap head allows operators to quickly and easily attach and detach the cord form the wristband
- Park-it feature on Snap-One™ provides convenient park station for cord when not in use
- Superior warranty
- Made in the United States of America
This item is made and stocked in Chino, CA
What the ESD Association says about testing wrist straps:
Per ESD Handbook TR20.20 section 5.3.9.1 Wrist Strap Checkers - "Wrist strap checkers have historically been the primary tool for testing the operation of the wrist strap system including, the wristband, grounding cord and most importantly, the electrical integrity of the contact between the wristband and the wearer. Wrist strap checkers measure the resistance of the entire system."
ANSI/ESD S20.20 Paragraph 6.2.2.1 Personnel Grounding Requirement "All personnel shall be bonded or electrically connected to ground or contrived ground when handling ESD sensitive items. When personnel are seated at ESD protective workstations, they shall be connected to the common point via a wrist strap system."
